Changes

Jump to: navigation, search

Natural rock catchment and Open water reservoir

1 byte removed, 18:54, 5 April 2012
Building the dam
* Dam wall can be built onto rocks with slope of up to 15%, width of dam base must always be 3/5 of dam height, width of crest should be 30cm, special attention should be paid to the rock-wall base as this has potential for leakage, and the upstream side of the dam wall should be rendered with up to 30mm of mortar. Procedures for dam wall construction are given in certain guides.
* Phased construction might provide a manageable way for users to construct their own dams, whereby each dry season the dam is raised until experience shows that capacity is sufficient for water demand. In this case, start with a dam of 2 metres height, then build on it successively to a total of 5 metres in 3 more stages. The advantage of doing this is that you build according to enthusiasm and seeing how much water is stored.
====Maintenance====
Akvopedia-spade, akvouser, bureaucrat, emailconfirmed, staff, susana-working-group-1, susana-working-group-10, susana-working-group-11, susana-working-group-12, susana-working-group-2, susana-working-group-3, susana-working-group-4, susana-working-group-5, susana-working-group-6, susana-working-group-7, susana-working-group-8, susana-working-group-9, susana-working-group-susana-member, administrator, widget editor
30,949
edits

Navigation menu