<small-title />
<!-- table at top of page with logo, picture, Application level, Management level, and input-output tables -->
{|width="100%"
The design of a Septic Tank depends on the number of users, the amount of water used per capita, the average annual temperature, the pumping frequency and the characteristics of the wastewater. The retention time should be designed for 48 hours to achieve moderate treatment.
===Aqua privy===
[[Image:Aqua_privyss.PNG|thumb|right|200px|[[Aqua privy |Aqua privy]]]]
}}
===Adequacy===
A Septic Tank is appropriate where there is a way of dispersing or transporting the effluent. Because the Septic Tank must be desludged regularly, a vacuum truck should be able to access the location. Often Septic Tanks are installed in the home, under the kitchen or bathroom which makes emptying difficult. If Septic Tanks are used in densely populated areas, on-site infiltration should not be used otherwise the ground will become oversaturated and excreta may rise up to the surface posing a serious health risk. Instead, the Septic Tank should be connected to a sewer and the effluent should be transported to a subsequent treatment or disposal site. Larger, multi-chamber Septic Tanks can be designed for groups of houses and/or public buildings (i.e. schools). Generally, the removal of 50% of solids, 30 to 40 % of biochemical oxygen demand (BOD) and a 1-log removal of E.coli can be expected in a well designed Septic Tank although efficiencies vary greatly depending on operation and maintenance and climactic conditions.
Septic Tanks can be installed in every type of climate although the efficiency will be affected in colder climates. Even though the Septic Tank is watertight, it should not be constructed in areas with high groundwater tables or where there is frequent flooding. Aquaprivies can be built indoors and above ground and are appropriate for rocky or flood-prone areas where pits or other technologies would not be appropriate. However, because they require frequent emptying and constant maintenance, they are only recommended for very specific applications.
===Health Aspects/Acceptance===
Although the removal of pathogens is not high, the entire tank is below the surface so users do not come in contact with any of the wastewater. Users should be careful when opening the tank because noxious and flammable gases may be released. Septic Tanks should have a vent. A vacuum truck should be used to empty the sludge from the Septic Tank. Users should not attempt to empty the pit themselves except with a manual technology like the [[Human-Powered Emptying and Transport|Gulper]].
===Upgrading===
A Septic Tank that is connected to a [[Leach Field]] or a [[Soak Pit]] can later be connected to a [[Solids-free Sewer]] if/when one is installed.
===Maintenance===
Septic Tanks should be checked to ensure that they are watertight and the levels of the scum and sludge should be monitored to ensure that the tank is functioning well. Because of the delicate ecology, care should be taken not to discharge harsh chemicals into the Septic Tank. The sludge should be removed annually using a vacuum truck to ensure proper functioning of the Septic Tank.
===Manuals, videos, and links===
This [http://www.lifewater.org/resources/san1/san1d4.pdf document] lists the specifications that need to be met for a succesful Aqua Privy.
===References===
Detailed Design Information:
* Crites, R. and Tchobanoglous, G. (1998). [http://books.google.com/books/about/Small_and_decentralized_wastewater_manag.html?id=yx9SAAAAMAAJ Small and Decentralized Wastewater Management Systems]. WCB and McGraw-Hill, New York, USA.
===Acknowledgements===
{{:Acknowledgements Sanitation}}
