Rope pump

From Akvopedia
Revision as of 12:10, 5 March 2009 by Marktielewestra (talk | contribs)

Jump to: navigation, search
Rope pump icon.png

A rope pump is a kind of pump used in developing areas to raise water from wells or boreholes. Rope pumps consist of a PVC pipe, and a rope with washers attached to it. The water is held in between the washers in the pipe, and is pulled to the surface. Rope pumps are very simple, and can be easily repaired. They are used for domestic water supply, irrigation and cattle watering.

For wells down to 35 m, rope pumps are often five times cheaper and more sustainable than piston pumps. Evaluations show that rope pumps on communal wells are being maintained by the users, if introduced properly. 90% of rope pumps remain operational, even after many years.

Because of its low cost, the pump is also popular for domestic use. A survey among 5,025 rural families in Nicaragua indicates that a rope pump increases income, even if used for domestic purposes only. Families with a pump earn US$ 220 per year more than families without a pump. In Nicaragua the pumps are now being produced commercially by 20 workshops. Different models of Rope pumps were introduced in Africa. This introduction has not always been successful: in some projects over 80% of the pumps do NOT work! However, with the "right" models and the "right" user training, up to 90% remain in operation in Africa, as the Victory model in Ghana and the Elephant model in Zimbabwe have proved.

Rope pump on a borehole, made in a local workshop in Mozambique


Rope pump used for irrigation in Zambia


Rope pump , (Victory model) on a hand-dug of 20 meters deep well, made in a local workshop in northern Ghana
Rope pump, bicycle model, produced and used in Nicaragua
Advantages Disadvantages
  • Significantly cheaper (up to 5 times) than piston pumps.
  • If made well, one pump can supply up to 250 people as experiences in Nicaragua, Ghana and other countries indicate. However, suggested use is for maximum of 20 families (100 people)
  • Easy to maintain.
  • Easy to train on maintenance.
  • Can be made locally by workshop.
  • Ideal to be used by one or two families in a shallow well on their own yard.
  • Can be used for irrigation.
  • Can be driven by hand, windmill, motor, bicycle, animals.
  • The rope pump is "too simple", therefore it is easy to copy, but experiences indicate "Simple is not easy": If not made well, the pump breaks down to much and can not be easily repaired.
  • Many Introductions have failed because of lack of training of users in maintenance and production and installation errors, so the pump parts wear out too fast, or parts break.
  • With different depths, different sizes of pump pipes are needed, otherwise the pumping becomes to heavy. See manuals on websites of Practica Foundation and Connect International.
  • The pump needs a “blocking system” on the handle to avoid return of the handle, which can be dangerous for children.
  • Compared to piston pumps the rope pumps splashes more.
  • Similar to Piston pumps, a cement slab and a good soak away are needed to avoid splash water becoming a cause for pollution.

Capacity

40 litres / min from 10 meters depth.

Costs

  • US$ 30-150 depending on model and cost of materials and labour.

Applying conditions

  • Numbers: 70,000 in Nicaragua, 20,000 in Mexico, Honduras, Guatemala, El Salvador, Ethiopia, Ghana, Senegal, Tanzania, Zambia, Mozambique, Zimbabwe, Cambodia, India, Vietnam, and others.
  • Range of depth: 1-35 meter (60 m with two cranks).
  • Application Communal wells, houshold, irrigation, cattle watering.
  • Suggested use The pump can be used by single families, or up to 20 families (100 people).
  • Models Rope pump models exist that are driven by hand, small motors, windmills, bicycle, and horses. They can be placed on hand dug wells or boreholes.
  • Cost of introduction: US$ 10,000-30,000 per project, including 20 pumps, engineering and hands-on training.
  • Rural water programme: US$ 150,000-200,000 per project, including 1,000 pumps, start up of production facility and hands-on training.

Experiences in different countries

In 2008, rope pumps are used in over 30 countries. Below the experiences in Nicaragua, Zimbabwe and Ghana are listed.

Nicaragua Some 70.000 rope pumps have been installed since 1990. The shift from imported piston pumps of 600$ to locally produced rope pumps of 70$ has doubled rural water supply in ten years, much faster than countries that apply piston pumps. Users do the maintenance and over 95% of the pumps remain in operation. The rope pump has been adopted as the standard water pump by the government.

Zimbabwe A rope pump model called the Elephant pump was introduced by the organisation Pump aid in 1990. Now some 3,000 pumps serve 950,000 people and some 95% of the pumps are working. Many more pumps are planned to be installed before 2015 and if this can be realized, this will reach 3 million more people.

Ghana The first experiences with rope pumps in Ghana were discouraging. In a World Bank funded project, 80% did not function after one year because of lack of user involvement and production errors. After improvements some 1600 pumps were installed.

Malawi, Blantyre trials Several rope pumps were introduced in order to provide a better alternative for the Afridev Community handpump, which is the standard handpump in Malawi. The Afridev is not popular due to many breakdowns and not available spare parts, especially in the more remote areas. However, the rope pumps also broke down many times, sometimes several times per month, due to the high number of users and was therefor not considered by the users as a good alternative for a community pump, although repairs were possible. Another disadvantage mentionned was that children found it difficult to pump and sometimes got hurt when the handle security break system was not functioning (in that case the handle turns back with a high speed due to the weight of the water in the riser pipe). The communities now prefer a more reliable handpump than the Afridev, with less need for spares.

Mozambique As in Malawi, the rope pump was seen as a viable alternative to the Afridev which is generally the official pump of choice. WaterAid had first introduced a bucket and windlass system in the Niassa provice as an alternative due to the high failure rate of Afridev pumps, but the Mozambican government refused to accept these as official community water supplies. WaterAid, in partnership with the Swiss Agency for Development Cooperation (SDC), UNICEF, CARE and the Government of Mozambique, therefore began a lengthy process of piloting a robust community rope pump, first relying on support from Bombas de Mecate in Nicaragua, but later adapting the design from Madagascar. The new model meets a number of key well protection and water quality criteria set down by the development team. Three manufacturers are now in operation in three provinces and through a process of skill sharing improvements have been made to the design resulting in a robust high quality model. A manufacturing standard has also been produced with the help of SKAT. The final stages of this process are currently underway which include the final approval of the pump as well as the licensing of the manufacturers by the Governments standards laboratory.

There are now more than 300 rope pumps installed across three provinces (Niassa, Cabo Delgado and Zambezia)and in Niassa particularly WaterAid funded projects continues to offer communities a choice of either the Rope Pump of the Afridev. In addition the installed pumps are monitored twice per year in order to better understand the pumps sustainability.

Apart from this initiative, PumpAid has also been active in the Chimoio province installing Elephant Pumps which are also rope pumps.

Please see the external links below for further information.

Burkina Faso WaterAid in Burkina Faso is also currently developing a rope pump model suitable to local conditions. This project has resulted in a renewed understanding across WaterAid of the need to ensure that rope pumps destined for community water supplies require high quality manufacturing and installation techniques in order for them to remain sustainable. WaterAid now intends to renew its efforts across the organisation to improving the quality of rope pumps in countries where this is supported. An international skills and knowledge sharing event to which all rope pump supporters and manufacturers will be invited is being considered for 2009.


Rope pump construction manual

PRACTICA foundation and the Technical Training Programme of the ETC Foundation (TTP/ETC) have put together a really excellent manual on how to build rope pumps (PDF, 2.5 Mbyte). It is an 86 page long document with detailed instructions.

Click here to see how you can contribute pictures

Your text could be here!

You can help improve Akvopedia by contributing explanations, field experience, pictures, construction manuals, etc. Click here to see how you can help.


Movies

External links

Retrieved from "https://akvopedia.org/s_wiki/index.php?title=Rope_pump&oldid=2271"