Difference between revisions of "Plastic-lined tank"
From Akvopedia
(→Examples and initiatives: Added link to Madagascar project.) |
|||
Line 23: | Line 23: | ||
== Examples and initiatives == | == Examples and initiatives == | ||
− | The [http://ideorg.org organisation IDE] in Asia is developing several models of plastic-lined tanks. | + | * The [http://ideorg.org organisation IDE] in Asia is developing several models of plastic-lined tanks. |
+ | * [http://www.akvo.org/rsr/project/16/ Low cost rehabilitation of impluvia with PVC liner in Madagascar] by CRS and Practica, has very nice photographs of the process of installing these type of tanks. | ||
+ | |||
{{Joinus}} | {{Joinus}} |
Revision as of 08:40, 26 June 2009
This article is under development. You can help Akvopedia by expanding it. |
A low cost alternative to metal or ferro-cement tanks for storing of water are plastic-lined tanks. Several models have been developed, for example:
- A cylinder of sheet metal containing a large (eg. 1 500 liter) reinforced plastic bag
- a plastic liner reinforced with a 10 000 liter plastic bag, installed in a hole in the ground.
Open storage tanks can be made of earth. If clay is not available, a plastic lining is needed to stop water from leaking away. Linings can be made of standard plastic sheet glued together with the tar normally used to repair roofs. The plastic must be covered with earth to prevent it from being exposed to the sun.
Advantages | Disadvantages/limitations |
---|---|
- Low cost alternative to metal or ferro-cement tanks. |
Capacity
Depending on the size of the design; 1 500 to 10 000 liter.
Costs
Material for a tank of 5 m3: 12 m2 of plastic sheet, 3 m of PVC tube and labour.
Examples and initiatives
- The organisation IDE in Asia is developing several models of plastic-lined tanks.
- Low cost rehabilitation of impluvia with PVC liner in Madagascar by CRS and Practica, has very nice photographs of the process of installing these type of tanks.
|