Difference between revisions of "Remote Manual Pumping (EMAS)"
| Line 8: | Line 8: | ||
The system can be used where the homes are up to 2km away from the pump. The standard type EMAS pump ejects water with a pressure up to 5 bar, which means that it elevates water up to 50 meters height. With this pressure, water can be conveyed horizontally until 2 Km, provided the dimensions of the tube are sufficient. If the distance is shorter than 500 m, pumping can be carried out with a 1/2" pipe. | The system can be used where the homes are up to 2km away from the pump. The standard type EMAS pump ejects water with a pressure up to 5 bar, which means that it elevates water up to 50 meters height. With this pressure, water can be conveyed horizontally until 2 Km, provided the dimensions of the tube are sufficient. If the distance is shorter than 500 m, pumping can be carried out with a 1/2" pipe. | ||
| − | == | + | ==Construction, operations and maintenance== |
| + | [[Image:Air chamber.jpg|thumb|right|250px|Using a plastic bottle as an air chamber]] | ||
| − | |||
The EMAS pump produces a pulsating stream. This makes it difficult to transport through a waterpipe, because it originates ram strokes and friction is highly increased. Consequently, the pulsating stream must be transformed into a continuous stream. This can be done by means of an air chamber. An air chamber can simply be a plastic bottle. | The EMAS pump produces a pulsating stream. This makes it difficult to transport through a waterpipe, because it originates ram strokes and friction is highly increased. Consequently, the pulsating stream must be transformed into a continuous stream. This can be done by means of an air chamber. An air chamber can simply be a plastic bottle. | ||
| Line 20: | Line 20: | ||
All air chambers need adequate maintenance. Water under pressure has the property of absorbing more air than when it is in its usual condition. Therefore after some time, air inside the chamber decreases, and it is not useful any more. According to the characteristics of the system, air in the chamber must be increased at given times. For this purpose, every chamber has a pneumatic valve. | All air chambers need adequate maintenance. Water under pressure has the property of absorbing more air than when it is in its usual condition. Therefore after some time, air inside the chamber decreases, and it is not useful any more. According to the characteristics of the system, air in the chamber must be increased at given times. For this purpose, every chamber has a pneumatic valve. | ||
| − | |||
All parts of the system can be manufactured locally: | All parts of the system can be manufactured locally: | ||
| Line 26: | Line 25: | ||
* [[Small household ferrocement watertanks |ferrocement tank]] | * [[Small household ferrocement watertanks |ferrocement tank]] | ||
* The air chamber can simply be a plastic bottle. | * The air chamber can simply be a plastic bottle. | ||
| − | |||
| − | |||
| − | == | + | ==Costs== |
| − | == | + | ==Field Experiences== |
| + | |||
| + | ==Reference manuals, videos, and links== | ||
Video manual on how to build an air chamber http://vimeo.com/8454417 | Video manual on how to build an air chamber http://vimeo.com/8454417 | ||
Spring catchment with long distance pumping http://vimeo.com/8454057 | Spring catchment with long distance pumping http://vimeo.com/8454057 | ||
| + | |||
| + | ==Acknowledgements== | ||
Revision as of 19:59, 27 April 2012
It is possible to create a system by which people can pump water into the faucet in their homes from a central pump. This is useful since often water sources such as small springs exist quite far away from homes. Rather than individuals having to carry water from the source to their homes, they simply go to the source to pump the water. Several houses can be connected to the same pump. The system uses an air chamber, pipes, and ferrocement tank to transport water automatically from the pump to storage tanks in the house.
Contents
History and Social Context
EMAS is the acronym for Escuela Móvil de Agua y Saneamiento (Mobile School for Water and Sanitation), in Bolivia, whose director, Wolfgang Eloy Buchner, developed the EMAS pump in the 1990's. EMAS is not only the name of the mobile school for water and sanitation, but also a whole technical and social concept of water and sanitation which includes rain water harvesting, solar water heaters, windpower, hydraulic rams, water treatment, small tanks and sinks, a variety of hand and foot pumps, and ferrocement tanks. The aim of the technologies and systems is to achieve the necessary supply of drinkable water, and water for micro irrigation in rural and sub urban areas.
Suitable Conditions
The system can be used where the homes are up to 2km away from the pump. The standard type EMAS pump ejects water with a pressure up to 5 bar, which means that it elevates water up to 50 meters height. With this pressure, water can be conveyed horizontally until 2 Km, provided the dimensions of the tube are sufficient. If the distance is shorter than 500 m, pumping can be carried out with a 1/2" pipe.
Construction, operations and maintenance
The EMAS pump produces a pulsating stream. This makes it difficult to transport through a waterpipe, because it originates ram strokes and friction is highly increased. Consequently, the pulsating stream must be transformed into a continuous stream. This can be done by means of an air chamber. An air chamber can simply be a plastic bottle.
From the air chamber pipes are layed to transport water to homes, with valves at each junction to control the flow of water. This can be done in several forms. Perhaps the most advisable is the one that has the form of a "star", wherein each house lays out its water pipe from the pump in a straight line. But this implies more piping and consequently higher costs. Its advantage is that you only have to go to the well, shut the correct valves and begin to pump. You don't need to walk far in order to shut the other connections.
If the straight set up is too expensive it is also possible to share the main faucet, and from there have different pipes leading to different houses. To fill the ferrocement reservoir at a given house, first you must shut the valves of the other branches, and then pump.
Maintenance
All air chambers need adequate maintenance. Water under pressure has the property of absorbing more air than when it is in its usual condition. Therefore after some time, air inside the chamber decreases, and it is not useful any more. According to the characteristics of the system, air in the chamber must be increased at given times. For this purpose, every chamber has a pneumatic valve.
All parts of the system can be manufactured locally:
- EMAS pump
- ferrocement tank
- The air chamber can simply be a plastic bottle.
Costs
Field Experiences
Reference manuals, videos, and links
Video manual on how to build an air chamber http://vimeo.com/8454417 Spring catchment with long distance pumping http://vimeo.com/8454057
