Difference between revisions of "Naiade water purification unit"
| Line 58: | Line 58: | ||
| not= | | not= | ||
- Dissolved Chemicals (such as pesticides, fertilizers, arsenic etc.)* <br> | - Dissolved Chemicals (such as pesticides, fertilizers, arsenic etc.)* <br> | ||
| − | |||
| process=Filtration + UV light treatment | | process=Filtration + UV light treatment | ||
| watcrit=Fresh water, not contaminated with dissolved chemicals. | | watcrit=Fresh water, not contaminated with dissolved chemicals. | ||
Revision as of 12:35, 13 July 2010
Disclaimer
On this page, a commercial water treatment system is presented. The information on this page has been provided by the company who produce the products, and has not been checked by Akvo. The appearance on this page does not mean that Akvo endorses the product. If you would like to add a product, please contact m.t.westra
akvo.org.
The Naiade water disinfection unit is a spin-off from Nedap’s and Trojan’s know-how of large scale drinking water and industrial waste water treatment plants. The Naiade drinking water disinfection unit very effectively combines the potential offered by solar energy, UV light and battery back-up.
The Naiade has been designed to remove bacteria, protozoa, viruses and colloidal parts from raw sweet water. It operates without the use of fossil fuel or chemicals.
The unit is made of tropical resistant poly ethylene. Its dimensions are 150 x 50 x 50 cm. The purification of the Naiade are:
- a sieve to remove larger parts such as leaves, stones etc.
- a 25 micron filter bag
- a 10 micron filter bag
- a UV light, which kills any remaining bacteria and viruses
| Advantages | Disadvantages/limitations |
|---|---|
| - Immediate use after installation - Supply for great number of people |
- Dependent to solar energy, although battery system is standard - Imported product; with possibility of local production based on annual turnover |
History and social context
Suitable conditions
The unit has been designed for operation under harsh conditions in grass root societies. Units can be installed, operated and maintained by people with no or little/low technical education or background.
|
|
'*' note: A special insert for the removal of arsenic can be supplied as a non-standard item. More info via [1].
Technical specification
Operation
The Naiade can be installed in 30 minutes by local people without a technical background. A step-by step, pictured instruction leaflet and tools are provided.
The user has to fill the unit with raw sweet water. This can be done via the top lid. The water passes a coarse sieve, two filter bags, 25 and 10 micron resp., and a cylindrical tube with a UV lamp. The unit has its own reservoir for raw water of 100 liters. The unit is so easy to use that even small children can operate it.
After having filled the unit with raw water, one just pushes the button. Clean and disinfected water flows out from the tap. The normal flow rate is 5 – 6 liters per minute. No waiting time is required. Water flow can be stopped/interrupted by pressing the button again. After 2 minutes, the tap closes automatically to avoid spillage of water. The flow rate is not influenced by the user, it is restricted by the design to guarantee a proper UV treatment of all passing water.
The capacity is about 3,500 liters per day, depending on the scale of organization.
The disinfected water fulfills the World Health Organization standards. Pathogen reduction rates up to 99,9999 % are obtained in many applications. (More details are available on request). It is strongly recommended to use separate containers for the raw and disinfected water to avoid recontamination.
The unit can function at night using a car battery of not less than 37 amp/hr capacity.
A supervision structure to guarantee optimal use is highly recommended.
Treatment Efficiency
| Bacteria | Viruses | Protozoa | Helminths | Turbidity | Iron | {{{extra_Field}}} | |
|---|---|---|---|---|---|---|---|
| Laboratory | Up to 100% | >99.999% | >99.9% | Up to 100% | Not available | - | |
| Field | Up to 100% | Not available | Not available | Up to 100% | Strong reduction, only optically indicated | - |
Based on UV light treatment experience using similar lamp systems, inserted in other Naiade units with different flow speeds, it can be safely assumed that there are no differences between the results obtained in the field and laboratories.
Maintenance
Both filter bags can be removed from the unit for cleaning purposes. After careful flushing these bags can be replaced. The life span of the UV lamp is 10,000 operating hours, nearly 3 years. The UV lamp can be replaced within half an hour by the users themselves.
The cleaning procedure should be as follows:
- Daily cleaning the PV panel for optimal energy supply
- Regular rinsing or washing of the filter bags to avoid blockage by sediments or a micro biological layer
- Regular cleaning of the glass tube of the UV lamp to avoid sedimentation. This highly depends on the chemical consistency/content of the raw water.
A colored LED indicates the status. After 8,000 hours of use the unit starts giving warning for necessary replacement of the UV lamp, although the users still have 2,000 hours of use to exchange the UV lamp. After 10,000 hours the unit will not supply any water until the old UV lamp has been replaced.Replacement of the UV lamp can be done on the spot by just undoing four screws. The UV lamp is a standard industrial UV lamp.
Manufacturing
The unit does not contain any moving parts except for the electro-magnetic tap.
It is made of tropical resistant poly ethylene. All material as well as the applied technology is based on the intensive use in remote and tropical areas.
The device was laboratory test from Unesco-IHE, Institute for Water Education. Field tests were done by the Water Research Institute of the Council for Scientific and Industrial Research, Ghana and ATIRA-Ahmedabad, India. Amongst others, received two prestigious international awards on sustainable development.
Estimated Lifespan
The estimated lifespan of the unit is over 10 years. Filter bags and UV lamps may need earlier replacement.
The UV lamp has a life of 10.000hrs or 3 years at 9 h/day continuous service. The filter needs to be replaced approximately every 12 months depending on TSS of influent/washing frequency. The back up battery (12V-50Ah) lasts 36 hours. Built-in electronics will register the used time of lamp and a light in front of the unit will indicate when the lamp needs to be replaced.
Cost
| Captial Cost | Operation Cost | Replacement Cost | Estimated 5 years Cost | Cost/liter treated |
|---|---|---|---|---|
| US$ 3,500 (Ex Works, unit price) | US$ 0 | US$ 95 | US$ 30 (estimated cost over 1 year) | US$ <0.003 (based on daily production of 3,500 liters) |
Note: the capital costs exclude the costs for water sanitation awareness programs and maintenance training, local support for installation and maintenance, transport and fees and duties.
Country experiences
Naiade projects have been realized in
Afghanistan, India, Sri Lanka, Pakistan, Indonesia, China, Brazil, Surinam, Mexico, Colombia, Morocco, Senegal, Sudan, Mozambique, Madagascar, Burkina Faso, Ghana, Tanzania, Cameroon, Benin, Mali, Egypt, South Africa, Kenya, Nigeria.
Manuals
Movies
Company Information
Company: Nedap NV
Visitor address:
Parallelweg 2
7140 DC Groenlo
The Netherlands
Postal address:
P.O. Box 101
7140 AC Groenlo
T +31 (0)544 471 888
F +31 (0)544 486 008
E [email protected]
External Links
- www.cleanwaternow.nl
- www.xing.com
- www.indiawaterportal.org
- www.electron-sa.co.za
- www.nedapnaiade.com
- www.safe-drinkingwater.com
- www.purificationdeleau.com
Footnotes
Acknowledgements
References
- KIWA Evaluation report. Declaration of the performance of the Naiade, Nieuwegein, The Netherlands, January 2005
- IFFCO Declaration of performance, New Delhi, India, April 2008
- Ghana Standards Boards, Accra, Ghana, December 2005
- UNESCO-IHE, Naiade Performance Testing, Delft, The Netherlands, December 2004
- Test reports on the Naiade, Water Research Institute, Accra, Ghana, September 2005
- Naiade water disinfection efficiency test report, Ministry of Water and Livestock Development, Dar es Salaam, Tanzania, November 2004
- Performance Evaluation Repot, Ahmedabad Textile Industry’s Research Institute, Ahmedabad, India, August 2005
- Naiade Test Results, Marmara University, Istanbul, Turkey, September 2004
- Analyse d’eau, Ministre de l’energie, des mines et de l’eau, Bamako, Mali, Octobre 2008
- Test results Naiade, Chinese Centre for Disease Control, Beijing, China, May 2007
- Test results of the Naiade, Governement de Bamako, Bamako, Mali, April 2008
