Difference between revisions of "水力喷射 — 综述"

From Akvopedia
Jump to: navigation, search
(Created page with "test")
 
Line 1: Line 1:
test
+
[[Image:Jetting icon.png|right|80px]]
 +
__NOTOC__ <small-title />
 +
Jetting is based on water circulation and water pressure. As opposed to sludging, water is pumped down the drill pipe and the ‘slurry’ (water and cuttings) is transported up the borehole between the drill pipe and the borehole wall. A motor pump is used to achieve an adequate water flow. The drill pipe may simply have an open end, or a drill bit can be added. Partial or full rotation of the drill pipe can be used. Thickeners (additives) can be added to the water in order to prevent hole collapse and reduce loss of working water (drill fluid).水力喷射是基于水循环和水压的一种方法。与生成淤泥相反,水被泵至钻管下方,“泥浆”(水与钻屑)被向上输送至钻管和井壁之间的探孔。运用马达泵来获得适当的水流。钻管可能只有一端有开口,或者可以增加一个钻头。可使用部分或完全转动钻管。可在水中加增稠剂(添加剂),防止洞口塌陷并降低钻井用水(钻井液)的流失。
 +
 
 +
Jetting is practiced in a wide range of varieties. The most simple consists of driving a plastic pipe down with water pressure from a motor pump (no drill bit and no rotation, with the water flow jetting the sand up). The depth is limited (no drill bit and extendable pipes). Other systems make use of extendable plastic or galvanized pipes and a drill bit and are rotated during drilling. With these systems greater depth can be reached.
 +
 
 +
===Suitable conditions===
 +
[[Image:Manually rotated jetting.jpg|thumb|right|200px|Manually rotated jetting]]
 +
[[Image:Typical drill bit.jpg|thumb|right|200px|Typical drill bit]]
 +
 
 +
Suitable for weakly cohesive sands and silts. Manual jetting is generally used up to depths of 35 meters.
 +
 
 +
 
 +
{| border="1" cellpadding="5" cellspacing="0" align="center"
 +
|-
 +
! width="50%" style="background:#efefef;" | Advantages
 +
! style="background:#f0f8ff;" | Disadvantages
 +
|-
 +
| valign="top" | - Very quick in fine and medium sand formations.<br>
 +
| valign="top" | - Generally limited to sandy soils. Soft clay will be penetrated only very slowly and coarse gravel and other highly permeable materials (cracks in the formation) cause loss of working water and cannot be drilled. The borehole stays open by water pressure. To prevent collapsing fluid-drilled boreholes must be kept full of water during the entire drilling and well installation process.<br>
 +
- A large amount of working water needs to be available on the drilling location (several 200 liter drums/hour). The drilling and well installation needs to be done on the same day. Leaving the borehole open during the night has a high risk of collapsing.<br>
 +
- The use of large quantities of water, the use of drilling fluids to greater depths and a motor pump make the equipment cost relatively high. <br>
 +
|}
 +
 
 +
===Construction, operations and maintenance===
 +
[[Image:Jetting.jpg|thumb|right|200px|Jetting. Credit: WEDC.]]
 +
 
 +
All drilling equipment, except the motor pump and some valves, is locally produced.
 +
 
 +
===Field experiences===
 +
Jetting is mainly used in Niger, Chad, Madagascar, Nigeria, Senegal, Burkina Faso, Uganda, Kenya, Soudan, Benin, Sri Lanka and western countries.
 +
 
 +
===Manuals, videos and links===
 +
* [http://www.unicef.org/malawi/MLW_resources_qualityassureboreholes.pdf CONSULTANCY SERVICES: QUALITY ASSURANCE OF UNICEF DRILLING PROGRAMES FOR BOREHOLES IN MALAWI] UNICEF, 2011.
 +
 
 +
* Robert Vuik, [http://www.practica.org/wp-content/uploads/services/publications/drilling%20manuals/EN/Jetting%20manual%20drilling%20PRACTICA%20EN.pdf Jetting: Manual Drilling Series, TECHNICAL TRAINING HANDBOOK ON AFFORDABLE MANUAL WELL DRILLING]. Practica Foundation, June 2010. French version: [http://www.practica.org/wp-content/uploads/services/publications/drilling%20manuals/FR/Jetting%20manual%20drilling%20PRACTICA%20FR.pdf FORAGE AU LANCAGE A L’EAU].
 +
 
 +
*  [http://www.lifewater.ca/resources.htm Lifewater Resources] on hydrogeology, well construction, all drilling techniques, hand pumps and more. Lifewater Canada, update 2004.
 +
 
 +
* [http://www.wellspringafrica.org  Manuals] on Percussion drilling, well construction, manufacturing tools. Cliff Missen, Wellspring Africa, draft 4.
 +
 
 +
* [http://ghanawashproject.org/wp-content/uploads/2012/07/36_Conference_Paper_Manual-Drilling_Ghana_Naugle-1.pdf Professionalization of Manual Drilling in Ghana.] Ghana WASH Project, Ghana.
 +
 
 +
* [http://docs.watsan.net/Scanned_PDF_Files/Class_Code_2_Water/212.5-79WE-7794-1.pdf Wells Construction: Hand dug and Hand drilled.] Richard Brush, Peace Corps 1980.
 +
 
 +
* [http://www.fao.org/docrep/X5567E/x5567e00.HTM Self-help wells.] R.G. Koegel, FAO 1985.
 +
 
 +
* [http://www.worldcat.org/title/shallow-wells/oclc/008463099 Shallow Wells.]  DHV Consulting Engineers, 1978.
 +
 
 +
* [http://www.watersanitationhygiene.org/References/EH_KEY_REFERENCES/WATER/Drilling/Hand%20Drilled%20Boreholes/Human%20Powered%20Drilling%20%28Cranfield%20University%29.pdf Human-Powered Drilling Technologies.] Richard Carter, Cranfield University, 2005.
 +
 
 +
* [http://www.rural-water-supply.net/en/resources/details/148 Drilling Boreholes for Hand pumps.] Peter Wurzel, SKAT Switzerland, 2001 - A book on hydrogeology, well construction, drilling techniques, well development.
 +
 
 +
* [http://www.fao.org/docrep/w7314e/w7314e0v.htm Low-cost shallow tube well construction in West Africa.] M. Sonau, FAO - An overview of shallow tube well drilling techniques.
 +
 
 +
* [http://www.lboro.ac.uk/well/resources/technical-briefs/43-simple-drilling-methods.pdf Technical note 43. Simple drilling methods.] Bob Elson and Rod Shaw, WEDC.
 +
 
 +
* [http://www.unicef.org/wash/files/Wat_e.pdf A Water Handbook, Technical Guidelines Series.] UNICEF, 1999 - Programming and implementation.
 +
 
 +
* [http://www.wateraid.org/documents/plugin_documents/technology_notes_2011.pdf Technology notes, section 7; Tube wells and boreholes.] WaterAid - An overview of human-powered drilling technologies.
 +
 
 +
* [http://www.lifewater.org/resources/rws2/rws2d3.pdf Water for the World, Technical note series rws 2: Designing Jetted Wells.] USAID 1982 - Developing  groundwater and manual drilling techniques.
 +
 
 +
* [http://www.enterpriseworks.org/display.cfm?id=5&sub=23&cont=60 Understanding low-cost Well Drilling.] Stephen Greenwood, Technical paper 61, VITA - Manuals on well-drilling.
 +
 
 +
* Lots of articles on [http://www.rural-water-supply.net/en/implementation/manual-drilling/well-jetting-washboring-or-hand-turning Jetting.] Rural Water Supply Network.
 +
 
 +
* [http://www.pat-drill.com PAT-Drill] - Engine powered drilling equipment and small machines.
 +
 
 +
* [http://www.lonestarbit.com Lone Star Bit] - Engine powered drilling equipment and small machines.
 +
 
 +
* [http://www.deeprock.com Deep Rock] - Engine powered drilling equipment and small machines.
 +
 
 +
* [http://www.drillingfab.com Drillingfab.] - Engine powered drilling equipment and small machines.
 +
 
 +
===Acknowledgements===
 +
* [http://www.lboro.ac.uk/well/resources/technical-briefs/43-simple-drilling-methods.pdf 43. Simple drilling methods.] WEDC.

Revision as of 01:30, 25 September 2015

Jetting icon.png

Jetting is based on water circulation and water pressure. As opposed to sludging, water is pumped down the drill pipe and the ‘slurry’ (water and cuttings) is transported up the borehole between the drill pipe and the borehole wall. A motor pump is used to achieve an adequate water flow. The drill pipe may simply have an open end, or a drill bit can be added. Partial or full rotation of the drill pipe can be used. Thickeners (additives) can be added to the water in order to prevent hole collapse and reduce loss of working water (drill fluid).水力喷射是基于水循环和水压的一种方法。与生成淤泥相反,水被泵至钻管下方,“泥浆”(水与钻屑)被向上输送至钻管和井壁之间的探孔。运用马达泵来获得适当的水流。钻管可能只有一端有开口,或者可以增加一个钻头。可使用部分或完全转动钻管。可在水中加增稠剂(添加剂),防止洞口塌陷并降低钻井用水(钻井液)的流失。

Jetting is practiced in a wide range of varieties. The most simple consists of driving a plastic pipe down with water pressure from a motor pump (no drill bit and no rotation, with the water flow jetting the sand up). The depth is limited (no drill bit and extendable pipes). Other systems make use of extendable plastic or galvanized pipes and a drill bit and are rotated during drilling. With these systems greater depth can be reached.

Suitable conditions

Manually rotated jetting
Typical drill bit

Suitable for weakly cohesive sands and silts. Manual jetting is generally used up to depths of 35 meters.


Advantages Disadvantages
- Very quick in fine and medium sand formations.
- Generally limited to sandy soils. Soft clay will be penetrated only very slowly and coarse gravel and other highly permeable materials (cracks in the formation) cause loss of working water and cannot be drilled. The borehole stays open by water pressure. To prevent collapsing fluid-drilled boreholes must be kept full of water during the entire drilling and well installation process.

- A large amount of working water needs to be available on the drilling location (several 200 liter drums/hour). The drilling and well installation needs to be done on the same day. Leaving the borehole open during the night has a high risk of collapsing.
- The use of large quantities of water, the use of drilling fluids to greater depths and a motor pump make the equipment cost relatively high.

Construction, operations and maintenance

Jetting. Credit: WEDC.

All drilling equipment, except the motor pump and some valves, is locally produced.

Field experiences

Jetting is mainly used in Niger, Chad, Madagascar, Nigeria, Senegal, Burkina Faso, Uganda, Kenya, Soudan, Benin, Sri Lanka and western countries.

Manuals, videos and links

  • Lifewater Resources on hydrogeology, well construction, all drilling techniques, hand pumps and more. Lifewater Canada, update 2004.
  • Manuals on Percussion drilling, well construction, manufacturing tools. Cliff Missen, Wellspring Africa, draft 4.
  • Lots of articles on Jetting. Rural Water Supply Network.
  • PAT-Drill - Engine powered drilling equipment and small machines.
  • Lone Star Bit - Engine powered drilling equipment and small machines.
  • Deep Rock - Engine powered drilling equipment and small machines.
  • Drillingfab. - Engine powered drilling equipment and small machines.

Acknowledgements