Difference between revisions of "Practitioner's Tool / Sewers for Buildings"
m (Winona moved page Sewers for Buildings - Design Features to Sewers for Buildings without leaving a redirect) |
|||
| Line 6: | Line 6: | ||
Two types of plastic sewer pipe are common for building sewers: polyvinyl chloride (PVC) and acrylonitrile butadiene styrene (ABS).PVC plastic uses slip-style ring fittings, and ABS plastic uses glue fittings. Talk with your local supplier to see which is most cost effective and readily available in your area.<br/> | Two types of plastic sewer pipe are common for building sewers: polyvinyl chloride (PVC) and acrylonitrile butadiene styrene (ABS).PVC plastic uses slip-style ring fittings, and ABS plastic uses glue fittings. Talk with your local supplier to see which is most cost effective and readily available in your area.<br/> | ||
| − | | [[File:Pipe1.png|thumb|right| | + | | [[File:Pipe1.png|thumb|right|200px|PVC-pipe]] |
| − | | [[File:Pipe2.png|thumb|left| | + | | [[File:Pipe2.png|thumb|left|200px|ABS-pipe]] |
|- | |- | ||
| | | | ||
| Line 18: | Line 18: | ||
The two styles of cleanouts shown to the left allow for snaking the pipe in both directions. Install one cleanout within 2 meters of the building and additional cleanouts every 15 meters of sewer run or anywhere the sewer pipe changes direction by 30 degrees or more. | The two styles of cleanouts shown to the left allow for snaking the pipe in both directions. Install one cleanout within 2 meters of the building and additional cleanouts every 15 meters of sewer run or anywhere the sewer pipe changes direction by 30 degrees or more. | ||
| − | | [[File:Cleanout1.png|right| | + | | [[File:Cleanout1.png|right|200px]] |
| − | | [[File:Cleanout2.png|left| | + | | [[File:Cleanout2.png|left|200px]] |
|- | |- | ||
| | | | ||
| Line 30: | Line 30: | ||
Always use sanitary sweep fittings when making bends in sewer lines as abrupt changes in direction can cause clogs and maintenance issues in the sewer line. Always install a 2-way cleanout directly upstream of the direction change. | Always use sanitary sweep fittings when making bends in sewer lines as abrupt changes in direction can cause clogs and maintenance issues in the sewer line. Always install a 2-way cleanout directly upstream of the direction change. | ||
| − | | [[File:Sweep1.png|thumb|right| | + | | [[File:Sweep1.png|thumb|right|200px|correct]] |
| − | | [[File:Sweep2.png|thumb|left| | + | | [[File:Sweep2.png|thumb|left|200px|incorrect]] |
|- | |- | ||
| | | | ||
| Line 42: | Line 42: | ||
Always use bedding materials to help protect the sewer pipe from damage due to sharp objects. The bedding material is laid down and raked to the desired slope, making it easier to install the pipe and providing long-term insurance against settling and breakage. | Always use bedding materials to help protect the sewer pipe from damage due to sharp objects. The bedding material is laid down and raked to the desired slope, making it easier to install the pipe and providing long-term insurance against settling and breakage. | ||
| − | | [[File:Bedding1.png|thumb|right| | + | | [[File:Bedding1.png|thumb|right|200px]] |
| − | | [[File:Bedding2.png|thumb|left| | + | | [[File:Bedding2.png|thumb|left|200px]] |
|- | |- | ||
| | | | ||
| Line 54: | Line 54: | ||
In the typical building sewer layout shown to the left--notice that the sewer line is connected to a vent stack that protrudes from the roof. This provides positive ventilation that transports sewer gasses to the roof level, instead of the street level where they may cause odors or nuisances. | In the typical building sewer layout shown to the left--notice that the sewer line is connected to a vent stack that protrudes from the roof. This provides positive ventilation that transports sewer gasses to the roof level, instead of the street level where they may cause odors or nuisances. | ||
| − | | [[File:Vents1.png|thumb|right| | + | | [[File:Vents1.png|thumb|right|200px]] |
| | | | ||
|} | |} | ||
Revision as of 00:24, 27 September 2016
Sewer PipesTwo types of plastic sewer pipe are common for building sewers: polyvinyl chloride (PVC) and acrylonitrile butadiene styrene (ABS).PVC plastic uses slip-style ring fittings, and ABS plastic uses glue fittings. Talk with your local supplier to see which is most cost effective and readily available in your area. |
||
CleanoutsThe two styles of cleanouts shown to the left allow for snaking the pipe in both directions. Install one cleanout within 2 meters of the building and additional cleanouts every 15 meters of sewer run or anywhere the sewer pipe changes direction by 30 degrees or more. |
 |
 |
Sanitary SweepsAlways use sanitary sweep fittings when making bends in sewer lines as abrupt changes in direction can cause clogs and maintenance issues in the sewer line. Always install a 2-way cleanout directly upstream of the direction change. |
||
Bedding and Cover MaterialAlways use bedding materials to help protect the sewer pipe from damage due to sharp objects. The bedding material is laid down and raked to the desired slope, making it easier to install the pipe and providing long-term insurance against settling and breakage. |
||
VentsIn the typical building sewer layout shown to the left--notice that the sewer line is connected to a vent stack that protrudes from the roof. This provides positive ventilation that transports sewer gasses to the roof level, instead of the street level where they may cause odors or nuisances. |
