Difference between revisions of "Groundwater - Rota sludge well drilling"
From Akvopedia
m |
m (Add NOTOC token) |
||
| Line 1: | Line 1: | ||
[[Image:Rota_sludge_well_drilling_icon.png|right]] | [[Image:Rota_sludge_well_drilling_icon.png|right]] | ||
| + | |||
| + | __NOTOC__ | ||
The Rota-sludge method is an adaptation of the Indian hand sludge method. The hardened drill bit is turned 90 degrees during drilling thus chiselling the bottom of the hole. This technology can be used to drill 2-5 inch wells in layers with sand, clay, gravel, tuff stone or weathered rock. | The Rota-sludge method is an adaptation of the Indian hand sludge method. The hardened drill bit is turned 90 degrees during drilling thus chiselling the bottom of the hole. This technology can be used to drill 2-5 inch wells in layers with sand, clay, gravel, tuff stone or weathered rock. | ||
Revision as of 17:23, 18 January 2008
The Rota-sludge method is an adaptation of the Indian hand sludge method. The hardened drill bit is turned 90 degrees during drilling thus chiselling the bottom of the hole. This technology can be used to drill 2-5 inch wells in layers with sand, clay, gravel, tuff stone or weathered rock.
| Advantages | Disadvantages |
|---|---|
| Drill in hard soil.
|
|
Capacity
2-5 inch wells to 20 meter.
Costs of wells
US$ 30 India. US$ 80-400 Nicaragua.
Applying conditions
Cost of introduction: Variable US$ 5,000-20,000 per project, including hand-on training, drill set and drilling of test wells.
Movie
External links
- www.practicafoundation.nl
- General info on well drilling www.rwsn.org
