Sustainable Oil Palm Farming / Storing and spraying chemicals

From Akvopedia
< Sustainable Oil Palm Farming
Revision as of 05:09, 4 January 2018 by Winona (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
English Indonesia
SNV logo.png
Wageningen small.png

Download: Module 3: Plantation Maintenance

Warning! Herbicides, pesticides and other chemicals are often toxic to humans, animals and palms, and should be used sparingly and with care.
  • Application of chemicals should always be carried out wearing full protective clothing (see Figure 7) including:
- Rubber gloves
- Boots
- Gas mask or mouth cover
- Safety glasses
- Rubber apron
  • It is recommended that spraying is carried out only by workers who have followed a training session
  • Spray equipment should be kept clean and in good shape
  • Label every chemical container to say what is inside it (e.g. herbicide (with name), pesticide (with name), etc.)
  • When preparing chemicals carefully follow the instructions on the package

Never store food in containers that were used for chemicals or fertilisers.

Using knapsack sprayers 1, 2

Figure 7: Proper protective clothing for herbicide spraying (but the left hand glove is missing).
Figure 8: Commonly used knapsack sprayer (adapted from 2)

The most commonly used knapsack sprayers are the so-called ‘lever-operated knapsack sprayers’ (see Figure 8). When using a knapsack sprayer, be sure to follow these steps:

Step 1. Read the manual carefully before using the sprayer.
Step 2. Before herbicide application, test with water to make sure the knapsack sprayer is functioning properly and has no leaks.
Step 3. Select the right nozzle. The nozzle is the part from which the herbicide spray comes out. The type of nozzle determines how much spray comes out and what the size of the spray is.
Step 4. Calibrate the sprayer once every 3 months using clean water and a bucket.

Spraying herbicides

Figure 9: Overview of how to spray herbicides

Herbicides can be sold as liquids or as powder. Liquid herbicides are often mixed at 0.5, 1 or 2 percent, which means 5, 10 or 20 ml per liter of water.

Always prepare herbicide solution according to the instructions on the package. Ask others for help if you are not sure how to do it. Before getting started, make sure that the sprayer is properly calibrated so that it is clear how much water comes out of the sprayer every minute.

Prepare the sprayer and do the spraying following these steps (see Figure 9):

Step 1. Fill the knapsack sprayer with water (e.g. 10 L).
Step 2. Add the herbicide (e.g. 100 or 200 ml).

Note: Always use gloves while adding the herbicide!

Step 3. Close the lid and shake well.
Step 4. Fill the sprayer up with more water (e.g. another 5 L) until it is full.
Step 5. Spray the weeds with the herbicide solution. Per hectare it is normal to spray 50—200 L of solution (0.5 to 2 L of herbicide) depending on the number of weeds. When doing clear-weeding (not normally a good idea!) more herbicide will be needed (e.g. up to 300 L/ha).
Step 6. Keep clear records of when you have sprayed, and how much.
Step 7. If it rains less than 4 hours after spraying, repeat the treatment (but not if spraying Gramoxone).

Common herbicides in oil palm

Figure 10: The mode of action of contact herbicides (left) and systemic herbicides (right). A contact herbicide kills the leaves it covers but is not transported into the stem or roots. Systemic herbicides are transported into the stem and roots and kill the entire plant.

Mode of action of common herbicides

Herbicides are often divided into two groups: contact herbicides and systemic herbicides. These groups differ in their mode of action (see Figure 10). Contact herbicides are toxic to the plant where they touch it. The most well-known contact herbicide is paraquat. Systemic herbicides move into the plant and are transported to the stem, roots, and other leaves. The most well-known systemic herbicide is glyphosate. For an overview of the most common herbicides used in oil palm plantations, see Table 1. Glyphosate, paraquat and triclopyr are discussed in more detail below.

Table 1: Some contact and systemic herbicides and their common brand names

Contact herbicides Systemic herbicides
Herbicide Brand Herbicide Brand
Paraquat

Glufosinate

Gramoxone

Basta

Glyphosate

Metsulferon methyl
Triclopyr

RoundUp

Ally
Garlon

Glyphosate 3

Figure 11: Glyphosate of a local Indonesian brand

The most well-known trade name of glyphosate is ‘Roundup’. Glyphosate can be used to kill a wide range of weeds. It is a ‘systemic herbicide’ so it is taken up through the leaves of the weeds and transported through the plant (see Figure 10). Glyphosate becomes inactive in the soil, so it is not taken up through the roots. It is rainfast within 1–4 hours after spraying.

Glyphosate should be handled with care:

  • It is slightly toxic to humans and animals
  • It is harmful for the eyes

Always wear proper protective clothing including safety glasses when mixing and spraying glyphosate, and make sure all body parts apart from the head are fully covered

Glyphosate will not damage the palms unless sprayed directly onto the leaves or used carelessly and in excessive quantities

Gramoxone 4

The active ingredient of gramoxone is paraquat. Paraquat can be used to kill many different types of weeds, including grasses. It is a ‘contact herbicide’: it works through direct contact with the leaves of the weeds and is not taken up into the plant. Paraquat becomes inactive in the soil. It is rainfast within half an hour after spraying.

Paraquat should be handled with great care:

  • It is highly toxic to humans and animals
  • Undiluted paraquat is deadly when swallowed
  • It is toxic when inhaled
  • It is harmful for the eyes
  • It can also irritate the skin

When mixing and spraying paraquat use full protective clothing including face mask, safety glasses and rubber gloves, and make sure that all body parts apart from the head are fully covered. Undiluted paraquat should be handled with extra care.

Paraquat will not damage the palms unless sprayed directly onto the leaves or used carelessly or in too large quantities.

Controlling woody weeds: Garlon, Release, or similar 5, 6

Figure 12: Garlon

The active ingredient of these herbicides is triclopyr 6. The most commonly used brand in oil palm plantations is ‘Garlon’ (see Figure 12). Herbicides with triclopyr kill woody weeds and most other weeds, but not grasses such as Imperata cylindrica (alang-alang). Triclopyr is a ‘systemic herbicide’: it is taken up through the leaves or through wounds in the bark. It becomes inactive in the soil and it is rainfast within 2—4 hours after spraying.

Herbicides with triclopyr should be handled with care:

  • Triclopyr is slightly toxic to humans and animals
  • It is harmful for the eyes
  • It can irritate the skin
  • It is highly toxic to fish and should never be sprayed in or next to waterways

When mixing and spraying triclopyr always wear proper protective clothing. Make sure all body parts apart from the head are fully covered.

Triclopyr is expensive, so use it only when necessary, and with care. Triclopyr will not damage the palms unless it is sprayed directly onto the leaves or used carelessly or in excessive quantities.

References

  1. P. Griffee, P. Diemer, C. Chinchilla, Smallholder Oil Palm Manual, in, FAO, Rome, Italy, 2004.
  2. 2.0 2.1 Stewardship Community, 2008, Knapsack spraying: best practices, http://www.stewardshipcommunity.com/best-spraying-practices/knapsack-spraying/knapsack-spraying-best-practice.html, Accessed September 2013.
  3. ExToxNet, 1994, Glyphosate, Extension Toxicology Network, http://pmep.cce.cornell.edu/profiles/extoxnet/dienochlor-glyphosate/glyphosate-ext.html, Accessed September 2013.
  4. ExToxNet, 1993, Paraquat, Extension Toxicology Network, http://pmep.cce.cornell.edu/profiles/extoxnet/metiram-propoxur/paraquat-ext.html, Accessed September 2013.
  5. C. Cox, Herbicide factsheet: triclopyr, Journal of Pesticide Reform, 20 (2000) 12—19.
  6. 6.0 6.1 Dow Agro, Tips & Training: Applications, The Dow Chemical Company, http://www.dowagro.com/vm/application/applications.htm, Accessed September 2013.

Acknowledgements

The material from Storing and spraying chemicals is sourced from Smallholder Oil Palm Handbook and put together by Lotte Suzanne Woittiez (Wageningen Universit) and Haryono Sadikin, Sri Turhina, Hidayat Dani, Tri Purba Dukan, and Hans Smit (SNV) in August 2016. See Module 3: Plantation Maintenance for more information.

SNV logo.png
Wageningen university logo.png