Jibon pump

From Akvopedia
Jump to: navigation, search
English Français Español भारत മലയാളം தமிழ் Swahili 한국어 中國 Indonesia Japanese
No. 6 icon.png
The Jibon pump. Photo: RWSN.
The Jibon pump. Photo: RWSN.

The Jibon Pump is a lever operated deep-set pump for shallow wells. Typically, Jibon Pumps are installed in collapsible tube wells with the screen extending to the coarse sand aquifer. It is designed for family use, serving up to 100 persons. The Jibon Pump is reasonably corrosion resistant and the maximum recommended lift is 18 m, although 15m is more standard. The Jibon Pump is a public domain pump defined by RWSN specifications. It is easy to install and has excellent potential for community-based maintenance.

Suitable conditions

The Jibon Pump is not designed for a high daily output; it is rather a family or small community pump.


Depths to be used: between 0-18 m
Cylinder diameter: 54.0 mm
Maximum Stroke: 215 mm
Approx. discharge (75 watt input): at 5 m head: 3.0 m³/hour

at 10 m head: 1.8 m³/hour
at 15 m head: 1.2 m³/hour

Population served: 50 - 100 people
Households: 5 - 10 hh
Water cons.: 20 - 25 l/per capita
Type of well: borehole or dug well


Construction, operations and maintenance

Pump head and handle are made of cast iron, pump rods are of FRP-material (Fibre glass Reinforced Plastic). The rising main, the suction pipe and the Robo screen are of PVC-U pipe, Plunger and foot valve are of PVC-U, stainless steel and rubber. This makes this pump reasonably corrosion resistant.

The Jibon Pump has an excellent potential for local manufacturing.

The installation of the Jibon Pump is easy and does not need any lifting equipment or special tools. The drillers who sink the tube wells with the “sludging method” are also installing the pumps.

Maintenance

This pump has an excellent “Community Management Potential”. Only two spanners are needed to repair the plunger and the foot valve. All maintenance operations can be performed by a village caretaker.

Manuals, videos and links

Acknowledgements