Changes

Arsenic filter

1,357 bytes added, 01:24, 6 July 2012

→‎Construction, operations and maintenance

'''Kanchan Arsenic filter'''<br>

The filter container can be constructed out of concrete or plastic. The container is about 0.9 m tall and either 0.3 m square or 0.3 m in diameter. The container is filled with layers of sieved and washed sand and gravel (also referred to as filter media). There is a standing water height of 5 cm above the sand layer. As in slow sand filters, a biological layer of microorganisms (also known as the biolayer or schmutzedecke) develops at the sand surface, which contributes to the water treatment. The diffuser basin is filled with 5 to 6 kg of non-galvanized iron nails for arsenic removal. A layer of bricks on top of the nails prevents displacement of the nails when water is poured into the filter.

Contaminated water is poured into the top of the filter on an intermittent basis. The water slowly passes through the diffuser, and percolates down through the biolayer, sand and gravel. Treated water naturally flows from the outlet. The biolayer is the key pathogen removing component of the filter. Without it, the filter is significantly less effective. It may take up to 30 days to establish the biolayer depending on inlet water quality and frequency of use. The water from the filter can be used during the first few weeks while the biolayer is being established, but disinfection is recommended during this time, as during regular on-going use.

'''Passive Oxidation'''<br>

• ← Older edit
• Newer edit →

Winona

Akvopedia-spade, akvouser, bureaucrat, emailconfirmed, staff, susana-working-group-1, susana-working-group-10, susana-working-group-11, susana-working-group-12, susana-working-group-2, susana-working-group-3, susana-working-group-4, susana-working-group-5, susana-working-group-6, susana-working-group-7, susana-working-group-8, susana-working-group-9, susana-working-group-susana-member, administrator, widget editor

30,949

edits