Changes

1. # Prepare the field to be irrigated.2. # Mount a 20 or 30-litre bucket (supplied by the farmer) with a -inch 27mm hole (cut with a hole saw, on a drill, or by hand with a sharp knife, atthe bottom of the bucket) and place it 1 m above the ground.3. # Assemble the outlet from the bottom of the bucket by connecting the male adapter,rubber washer and female adapter.4. # Install the filter screen at the bottom of the bucket.5. # Install the two supply tubes running from the filter to the barb fittings.6. # Connect the 15-m drip irrigation tape through the drip lock fittings. '''How to adapt the system to more than two drip lines'''<br>The contents of a Chapin bucket kit enable one to set up 2 x 15 m (two drip lines each 15 m long) or, by using the submain pipe, the kit can be used for 4 rows 7.5 m long or 6 rows 5 m long, depending on the size of the garden. To do this you need the piercing tool, the submain (4.6 m long) and the 3-m micro-tubing included in the kit. This is achieved by: # Cutting each drip tape twice (to make 4 lines), or three times (to make 6 lines);# Cutting 4–6 pieces of the micro-tube, depending on the number of drip lines;# Piercing a hole through the submain using the piercing tool;# Connecting each drip line to the submain using the micro-tubes.