Changes

Concrete production and drought

48 bytes added, 23:40, 4 June 2012

→‎Construction, operations and maintenance

* Use the correct ratios for different applications – refer to relevant tables. A field method to check if contractors have used the correct ratio is to take some of the wet mix, put it into a transparent bottle and shake up with some water – the cement fraction should settle out on top when it is left to stand, giving an indication of the cement fraction.

* Add only the very minimum amount of water for workability – this is one of the most important aspects to making strong concrete. The amount of water needed for the hydration process when mixing concrete is a lot less than what is normally added to mixtures in the field, where additional water is needed to increase workability of the concrete. The point is that the less water used, the better, since if too much water is used, the concrete will become weaker. Any excess water not used in hydration will remain in the pores – when this water evaporates, the pores remain – the more water added, the bigger the pores and the weaker the final product. [http://en.wikipedia.org/wiki/Concrete#Chemical_admixtures Admixtures] can be added to the concrete mix in order to reduce the amount of water needed. [http://en.wikipedia.org/wiki/Superplasticizer Superplasticizers ] work best by reducing the amount of water that needs to be added when mixing concrete, which results in 35% less shrinkage. The resulting end material is stronger and can reduce the amount of micro cracks in mortar by half compared to normal mortar while resulting in 76% fewer leaks. The amount of [http://en.wikipedia.org/wiki/Plasticizer plasticizer] to be added should not be greater than 2% of the dry material weight. A plasticizer that can be used that is possibly available is household washing up liquid. In hot climates though, more research is needed in the field application of plasticizers, since the reduction of water used (and increased strength of product) may not be that great due to more water needed to prevent drying out between mixing and application.

* Type of water used should be as pure as possible.

Winona

Akvopedia-spade, akvouser, bureaucrat, emailconfirmed, staff, susana-working-group-1, susana-working-group-10, susana-working-group-11, susana-working-group-12, susana-working-group-2, susana-working-group-3, susana-working-group-4, susana-working-group-5, susana-working-group-6, susana-working-group-7, susana-working-group-8, susana-working-group-9, susana-working-group-susana-member, administrator, widget editor

30,949

edits