Changes

Remote Manual Pumping (EMAS)

8 bytes removed, 19:00, 27 April 2012
no edit summary
It is possible to create a system by which people can pump water into the faucet in their homes from a central pump. This is useful since often water sources such as small springs exist quite far away from homes. Rather than individuals having to carry water from the source to their homes, they simply go to the source to pump the water. Several houses can be connected to the same pump. The system uses an air chamber, pipes, and ferrocement tank to transport water automatically from the pump to storage tanks in the house.
EMAS is the acronym for Escuela Móvil de Agua y Saneamiento (Mobile School for Water and Sanitation), in Bolivia, whose director, Wolfgang Eloy Buchner, developed the EMAS pump in the 1990's1990s. EMAS is not only the name of the mobile school for water and sanitation, but also a whole technical and social concept of water and sanitation which includes rain water harvesting, solar water heaters, windpower, hydraulic rams, water treatment, small tanks and sinks, a variety of hand and foot pumps, and ferrocement tanks. The aim of the technologies and systems is to achieve the necessary supply of drinkable water, and water for micro irrigation in rural and sub urban areas.
==Suitable Conditions==
The EMAS pump produces a pulsating stream. This makes it difficult to transport through a waterpipe, because it originates ram strokes and friction is highly increased. Consequently, the pulsating stream must be transformed into a continuous stream. This can be done by means of an air chamber. An air chamber can simply be a plastic bottle.
From the The air chamber pipes are layed laid to transport water to homes, with valves at each junction to control the flow of water. This can be done in several forms. Perhaps the most advisable is the one that has the form of a "star", wherein each house lays out its water pipe from the pump in a straight line. But this implies more piping and consequently higher costs. Its advantage is that you only have to go to the well, shut the correct valves and begin to pump. You don't need to walk far in order to shut the other connections.
If the straight set up is too expensive it is also possible to share the main faucet, and from there have different pipes leading to different houses. To fill the ferrocement reservoir at a given house, first you must shut the valves of the other branches, and then pump.
Akvopedia-spade, akvouser, bureaucrat, emailconfirmed, staff, susana-working-group-1, susana-working-group-10, susana-working-group-11, susana-working-group-12, susana-working-group-2, susana-working-group-3, susana-working-group-4, susana-working-group-5, susana-working-group-6, susana-working-group-7, susana-working-group-8, susana-working-group-9, susana-working-group-susana-member, administrator, widget editor
30,949
edits